1. Read the installation instructions on the box
2. Fill the clean water tank with water (maximum 40°C)
3. Plug the device into a power outlet
4. Press the power button to start the device
5. Lightly moisten the surface using the spray function or cleaning solution
6. Go over the stain several times calmly with the brush nozzle
7. Turn off the device and empty the dirty water tank

PRO model buttons:

1. Top button → starts the suction function

2. Middle button → selects the mode:

• Blue = cold water
• Yellow = hot water
• Red = steam

3. Bottom button → activates the selected function

The light flashes while heating. Wait until it stops.

Self-cleaning prevents blockages and loss of suction power.

1. Turn off the device
2. Remove the brush nozzle
3. Attach the self-cleaning tool
4. Turn the device on
5. Let it flush for a few seconds

PRO model:

1. Bottom button = water
2. Top button = suction

Extra:

1. Store the cable using the rotating hooks

1. Reduced suction power

• Check the hose and nozzle
• Use self-cleaning

2. No or little water

• Remove the hose or attachment and test
• If it doesn’t work → contact support

3. Flashing light (PRO)

• Reinstall the dirty water tank

Achaté Spot Cleaner - Attachment
Achaté Spot Cleaner - Hose
Achaté Spot Cleaner - Dirty water tank
Achaté Spot Cleaner PRO - Attachment

Can’t find your part? Contact customer service.

1. Use the device indoors only
2. Do not use water hotter than 40°C
3. Do not use on delicate fabrics
4. Do not tilt the device when the tanks are filled
5. Stop if you notice unusual smells or sounds

Spot Cleaner instruction video

Spot Cleaner PRO instruction video

Achaté Spot Cleaner | First time use

Achaté Spot Cleaner | Suction power problems